Incorrect representation of True Vectors on FR-2228

[Copper Spirit]

Radar Model - FR 2228

My Furuno Radar with true vectors (ground stabilized mode) "ON" is showing incorrectly.

HDG - 223deg
CMG - 224deg

Please see attached pictures for better understanding the issue.

The small Blue dotted line is the True vector.

The long blue dotted line is the Heading line of the vessel.

As stated above the CMG is greater than the HDG, however the vector as seen in the pictures are seen to the port (left side) of the HDG line.

When in actual the True vector should show to the Starboard (Right Side) of the HDG line.

Assistance on the above will be highly Appreciated.

 

[Magnetron]

Thank you Copper Spirit for your question. The FAR-2xx8 series radar is a commercial product, this forum is more aligned for DRS Light Marine sensors. There may be some configuration parameters that Furuno's trained support technicians can advise on. For next steps, we recommend contacting Furuno Tech Support and request the "Deep Sea Department."

- Maggy